EZ 101 Outdoor Tankless Water Heater
Tested by us in our USA laboratory. this model is aesthetically pleasing and has simple design features that make this unit easy to use and install as well as unobtrusive if located within view of working or living spaces. This model delivers up to 1.6 gallons per minute of consistent and continuous hot water. With low water pressure ignition, this heater can function under 0.02Mpa (2.9 Psi) of water pressure. No plug-in is required, making this the perfect unit for garage, barn, or outbuildings. This "No pilot light" design is safe and convenient, using automatic ignition to further your energy savings. (The ignition electrical source is supplied by two "D" cells) For example; As tested in our USA laboratory, this unit can easily operate via a garden hose inlet water supply. This unit is an excellent choice for persons needing occasional on-demand hot water. Our LP model is ideal for use during hunting or camping expeditions, or you may chose to use this heater for semi-permanant installations at long term camp sites, small lake homes or cabins. Or for those who live in remote rustic cabins and homes with one bath.
NOTE: THIS UNIT WAS DEVELOPED FOR OUTDOOR INSTALLATIONS ONLY! Like most heaters of this type, this unit does not have freeze protection. If located in a summer campsite, cabin or vacation home, it will have to be thoroughly drained after seasonal use.
- Fully-automatic operation. Simply turn on the water spigot or shower, hot water will arrive in a few moments. After the tap is turned off, the tankless heater will automatically extinguish itself.
- Featuring a “proportional control valve for electricity and gas”. According to the changing parameter’s of the temperature sensor in the hot water outlet pipe, the micro-chip automatically and instantaneously signals the proportioning valve to adjust the gas volume, keeping the hot water temperature constant.
- Aesthetically pleasing and simple design features make this unit easy to use and install as well as unobtrusive.
- Electronic control system via computer chip is advanced and extremely reliable. No plug-in is required. The "No pilot light" design is safe and convenient, using automatic ignition to further your energy savings. (The ignition electrical source is supplied by two "D" cells)
- Sensitive ion flame sensor will cut the gas supply if the flame goes out unexpectedly.
- Insufficient water pressure protection.
- The 20-minute safety timer reduces the risk of carbon-monoxide poisoning if improperly ventilated.
- Featuring a precise and safe water flow sensor to stabilize the exit water flow.
- Independent control of water flow and gas flow making it easy to regulate the water temperature.
- If the water supply is interrupted, the gas valve will automatically turn off.
- High thermal efficiency and superb combustion performance.
- With a winter-summer switch and double proportional valves, the inlet water temperature range is much wider.
- Low water pressure ignition. The heater can function under 0.02Mpa (2.9 Psi) water pressure. Making this unit suitable for use at high altitude or those using well water with older or less powerful pumping systems. For example; As tested in our USA laboratory, this unit can easily operate via a garden hose inlet water supply.
